Release Notes

January 22

Secondary Voltage Display

• The breakdown (240V) will be removed to simplify the menu and remove confusion about secondary voltages other than 240V which exist on that layer.

January 17

HealthMap Line Monitors

• Fixed: Errors were showing when going to the main map for HealthMap customers. This was due to HealthMap customers not having Line Monitors.

November 21

Remove Reclosers and Boundary Meters

• All Recloser and Boundary Meter related functionality in the web application have been removed after all customers have migrated to use the new SCADA functionality.

October 31

GIS Sync - fix latitude/longitude order

• The constructor was being used incorrectly in a few places, where latitude/longitude were swapped.

October 05

Temperature Readings:

• Fixed: The temp graph was showing the expected hourly readings, followed by an extra value 1min later that was much lower than the one that came on the hour.

October 02

Dashboard Transformer Load Count Not Excluding Transformers

• Fixed: The dashboard transformer loading readings and the transformer list page had different number of transformers which was due to the dashboard tx list not considering excluded transformers.

September 04

TX Load calculations delay

• Fixed: Some systems had a delay on their TX load information.

August 28

Outage Message Filter Issue

• Fixed: When filtered the Received column for outage messages (table when clicking on LG on dashboard), after entering in 'contains' value, an error occurred.

July 31

Menu options hidden on mobile

• When viewing SmartMAP on some mobile devices the bottom options on the menu were not accessible because they got cut off and there was no slider.

July 27

Remove Temperature Bubbles

• The Temperature bubbles (tooltip) is removed when hovering the graphs as it was hard to select the actual data points that users needed the bubbles for.  

July 15

TXs taking too long to load in SmartMAP maps

• Fixed: The "view on map" option for was optimized for performance

July 03

Transformer Phase - incorrect

• Fixed: The system model had the current phasing correct but was not updated in web model.

June 26

Can't Cancel PSCs

• Fixed: SmartMAP allows users to queue PSC's and there is an X button to cancel requests.  The X was not working.

June 06

TX Page not loading

• Fixed: The transformers page was not loading and showed an error.

May 25

Connexo V12 PSC

• Fixed: Connexo V12 PSC did not work for meters where Meter Number != Meter Name.

May 08

Inactive Meter Events

• The dashboard tiles for last gasp messages, tilt/tamper, brown out, and hot socket events will all exclude meters that are currently inactive.

May 06

TX Load Export

• An export option is now available to the SmartMAP & HealthMAP Transformers page to allow a user to select a date range and download all of the data.

May 03

Support for multiple AMI's

• Added the ability to add multiple AMI connection references to support two AMI's for power status check and outage detection.

May 01

Voltage Under Threshold Alert

• Fixed: Voltage under threshold expected a negative value but the form would not allow the user to enter one.

March 21

Boundary meters

• Fixed: Dashboard Boundary Meters were not updating.

February 23

GIS Sync - Import/Export Enhancements

February 03

User-created levels wouldn't work

January 31 

Load/Voltage Gauges

• Fixed: The gauges stopped showing details. 

January 25

Last Gasp Messages

• Fixed: some Last Gasp Messages were not being processed.

January 18 

TX Loading - Meter Details

• Fixed: When viewing TX Loading and clicking an interval to reveal the bar graph of the meters that make up the TX load, the meter details were not loading for all meters.

January 13  

Auto-Scrolling Inconsistencies 

• Fixed: A number of inconsistencies and unintended functionality regarding the automatic scrolling implemented in the SmartMap Application.

December 20

Power status Check

• Fixed: Power status check returned empty error. 

December 19

    Error Loading Nominal Voltage

• Fixed: All HealthMAP customers were showing an error loading nominal voltage.  HealthMAP customers nominal voltages come from KX, where SmartMAP gets them from SMAP.MODELMETERS which appeared to be working.

December 15 

    TX search broken

• Fixed:  When searched for any part of the name in the Transformers search it had no results.

December 13

Password Reset Issue

• After resetting password and setting new one, the submit button will not work.

November 24

Data by Timestamp report

• Similar to the TX Peak Report, which provides a list of all transformers with their peak load for a specified date range, users can view all TX Loads for a specific timestamp (or meter load/voltage).  The data is downloadable so users can perform analysis based on that data, or view/compare with GIS.

 Help Icon/link for web 

• Help button added to top right corner. Clicking the button opens a new nab navigating to the correct support repository.

November 6th

Fixed: Geotab - Vehicles not working

• Vehicles were not updating on the map and last updated locations pointed where the device settings was reconfigured.

August 30th, 2023

    Users without “Add/Edit Outage” will no longer be able to view the outage menu and add/edit outages. 



August 23rd, 2023
 

    Create new system model version when system model is updated from web app – internal & external

August 16th, 2023

    Added Samsara AVL integration to SmartMap. 

August 2nd, 2023

July 29th, 2023

July 26th, 2023 

July 5th, 2023

1. Web map maximum zoom level will now go beyond what the default tiles allow, changing to a blank background/canvas to do so

June 17th, 2023

1. Updated map side bars with new styling, labels and icons

May 31st , 2023

1. Add Ability to edit non Outage and major event flags in Outage Management

2. Changed to a new Icon Set for the navigation and Header bar

May 27th, 2023

1. Dashboard Data based on Time range (Default of 24 hours)

April 19th, 2023

April 12, 2023

March 30th, 2023

1. Excluded meters will now be shown on the map and searchable.
2. The meter name will be shown as the search result label when searching for meters instead of the meter number.

March 22nd, 2023

1. Improved Dashboard Loading Performance  - Data on the dashboard should load faster now. 
2. Enabled Response Compression, Dashboard, and some Map endpoints will now transfer less data, resulting in a faster load time.

March 8th, 2023

1. Added functionality to the new api which allows editing meter properties. Also added a form to the meter detail page to interact with this backend functionality.
2. Fixed a data display issue which made the relationship between a meter’s phasing and nominal voltage values unclear.
3. Added new symbols for Overhead VS Underground assets

March 1st, 2023

1. User Level Access Bug Fix

Changes to User Level Access permissions will now take effect immediately.

February 22nd, 2023

1. Performance Improvement

 Improved simultaneous request handling - page loading should be a lot faster now.

February 15th, 2023

1. Meter Voltage Edits From the Front End